Specifications
Direct
Energy
(Light)
Wattage:
222
Watts, maximum
Current: 120
V.
60
Hz.
2 Amperes. maximum
Operating Temperature: 40-100F
Features
and
Functions
The standard package includes WeedErase~ weed-treatment
tool
with the
directed energy end. The directed energy end works best
for
controlling grasses
and sedges.
two
of
the three main types
of
grasses. The WeedErase'" also controls
dandelion and thistle. Please use longer exposure times. typically g seconds.
Should the dandelion recover, retreat once regrowth
is
noticed. This
will
maximize
the success rate
of
killing the
weed
on the second treatment.
Features
and
Functions
Be sure
to
familiarize yourself with
the
features
of
this
weed-treatment
tool and
how they function.
Height Adjustment-Allows you
to
adjust the working height
of
the
unit. Before
plugging the unit into power, simply loosen the nut and adjust the
tube
to desired
height. Then tighten the nut back up.
Power/treatment switch - By pressing and holding the switch for 5 seconds.
the unit
will
power
on.
The status LEDs
will
flash
in
order from Green to
Red,
indicating the unit
is
turning
on.
Once the unit
is
on.
it can be turned
off
by
pressing
and holding the switch for 5 seconds.
Status LEDs - These indicate that the unit
is
warming up. ready for
use.
and/or
the
treatment light
is
on.
Gree
n-
Indicates power
is
on and treatment applicator
will
be
hot. Flashing
indicates treatment applicator has not
yet
reached
full
"ready" temperature.
Blue - Indicates timed treatment cycle
in
progress.
Red - Indicates heater cycling
on/off.
Note: treatment applicator can remain hot
while heater
is
off
Power Cord - supplies power
to
the weed-treatment
tool
when
it
is
plugged
in.
Directed energy end - stresses the weed's leaves. root crown. and root. when
placed onto
the
weed.
Auto-Off-After
10
minutes
of
inactivity the unit
will
power itself off. Restart the unit
by
turning on the unit and following the startup process.
page4
To Next Page
Loading...