Need help?Do you have a question about the Viatran 510 and is the answer not in the manual?
Details the Viatran Model 510 pressure transmitter for oil field service, its features, and benefits.
Outlines essential electrical, pressure, and safety precautions for installation and operation.
Provides guidance on safely handling the transmitter, considering its weight and potential temperature.
Specifies CE compliance, grounding, connector care, and installation steps for the transmitter.
Details the pin assignments for the 6-pin bayonet electrical connector on the Model 510.
Specifies the material used for the sensor construction of all ranges.
Identifies the standard electrical connector type for the transmitter.
Lists the pressure connection types for various pressure ranges.
Details the standard marking information found on Viatran products.
Explains the process and benefits of field calibrating the 510 Transmitter.
Lists and explains various optional agency certifications for the product.
Details specific instructions for ATEX certified units regarding flying leads and dust caps.
Defines the intended applications and potential misuse of the instrument.
Provides guidelines for cleaning, maintenance, and the process for product repair.
Outlines the terms and conditions of the product warranty, including limitations.
Explains the procedure for returning a product for inspection, testing, and repair.
General| Model | 510 |
|---|---|
| Category | Transmitter |
| Manufacturer | Viatran |
| Output Signal | 4-20 mA, 0-5 VDC, 0-10 VDC |
| Wetted Materials | 17-4 PH stainless steel |
| Diaphragm Material | 17-4 PH stainless steel |
| Accuracy | ±0.25% FS |
| Operating Temperature | -40°F to 185°F (-40°C to 85°C) |
| Electrical Connection | 1/2" NPT |
| Pressure Port | 1/4" NPT, 1/2" NPT |
| Housing Material | Stainless Steel |
| Weight | Varies depending on configuration |
To Next Page