Vibe PULSE Series - Mounting Guidelines; Power Connections; High Level Input Connections

REM
Mounting Guidelines
Power Connections
Your VIBE enclosure is designed with a swift installation routine in mind.
Please mount the enclosure in a dry location on a solid surface.
NEVER mount the amplier upside down as this will cause the amplier to over heat
and will eventually damage the amplier.
Before xing the enclosure in place please ensure that there is sufcient air ow
around the exterior of the amplier casing, at least two inches is sufcient.
4
REM
Battery
High Level Input Connections
Speaker Output From Headunit
NOTE : When using high level input it is not necessary to connect the remote turn on wire.
Do not connect both high level and low level input at the same time.
Chassis Ground
Remote Turn On From Headunit
Fuse Close To Battery