EasyManua.ls Logo

VICI GT - Page 6

VICI GT
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
ASSEMBLY
1.Fix the stem tube and open the kickstand
2.Install the handlebar into the stem tube.
3.Use the hexagon wrench in the box to
tighten the screws on both sides and the
back of the handlebars.
Tips: When installing the screws, please install all
the 6 screws on 1/2 of the pole, and then tighten them
separately to prevent the front part from warping.
4.After the installation is complete,
detect by switching on and off.