Vicko AS175-3 - Fitting and Removing Dust Canister; Fitting and Removing Main Vacuum Unit

29
Fitting the
Canister for dust collection
:
1. Insert the Canister for dust
collection (12) into the Main
Vacuum unit (6) and lock it.
Removing the Canister for dust collection:
1. Press the release button (9).
2. Pull the Canister for dust
collection (12) in order to remove
it.
Fitting the Main Vacuum unit:
1. Insert the Main Vacuum unit (6)
into the Main body (3).
2. Press the handle (7) to lock it.
Removing the Main Vacuum unit:
1. Press the release button (5).
2. Pull the main vacuum unit (6) in
order to remove it from the main
body (3).