5
NOTE: Tank should be carried using two hands. One hand using one of the carrying handles located
on tank top and other hand supporting the base of the tank.
Kaz will not accept responsibility for property damage caused by water spillage.
Filling/Refilling
Operating Humidifier
Operating Projector
1. Remove Tank and turn upside down.
2. Turn Tank Cap in the direction of the open lock symbol to remove cap.
3. Fill Tank with cool water. Do not fill with warm or hot water.
4. Securely replace Tank Cap, aligning arrow to lock symbol.
5. Place Tank back on Base.
CAUTION: USE CARE WHEN HANDLING WATER TANK TO AVOID UNNECESSARY
IMPACT. BANGING OR DROPPING THE WATER TANK COULD RESULT IN DAMAGE
TO THE TANK THAT WILL CAUSE LEAKING.
1. Power: With the Power Knob in the off position, plug humidifier into a polarized 120V outlet.
CAUTION: TO AVOID ELECTRIC SHOCK DO NOT PLUG HUMIDIFIER INTO OUTLET WITH WET HANDS.
2. Output: Turn the Power Knob clockwise to highest setting.
3. Position humidifier to direct mist output away from walls, furniture and bedding.
4. Humidity Level: When a comfortable humidity level is reached turn Power Knob to a lower setting. A
comfortable humidity level is between 40-60%.
To monitor your humidity level use a humidity monitor such as the Vicks V70 or V70-CAN model.
If you notice condensation on the walls, windows or around unit, your humidity level is too high. Turn humidifier off.
Step 1 Step 2 Step 3
Step 2
lock unlock
Step 4
1. Press the projector button to turn the projector feature on or off.
2. Slide projector switch to desired dream theme icon; elephant ( ) for safari theme,
dolphin ( ) for sea theme and star ( ) for starry night theme.
3. Each theme will cycle through 3 images automatically.
4. The theme can be changed at any time by simply sliding the switch to desired theme’s icon.
NOTE: Projector can be operated independent of the humidifier
Projector Switch
Projector Button
To Next Page
Loading...
Need help?
General
