Step 2
Step 1
SETTING UP YOUR HUMIDIFIER
Placement
Soak Filter
Remove tank and set
aside. Remove filter from
humidifier and soak the
filter in cool water.
DO NOT wring filter.
Scent Pad
Remove tank and locate
Scent Pad slot.
Step 1
If there is a used scent pad
in the slot carefully remove
it. Replace with a new scent
pad. Carefully open scent
pad bag taking care to hold
pad using bag. Use care not
to come in direct contact
with new scent pad.
Insert scent pad into Scent
Pad Slot. You can use
the bag as a holder
during insertion.
Step 2 Step 3
Select a firm, level location at least 6”
(15cm) from any walls for proper airflow.
Place the humidifier on a water-resistant
surface, as water can damage furniture
and some flooring.
Locate the projector lens and
projector cover in the packaging.
Remove water tank from unit.
Insert projector lens with projector
cover into center column and lock
in place.
Remove filter tray from
unit before installing the
wet filter.
Insert wet filter into filter
tray. Place filter tray back
in humidifier.
Kaz will not accept responsibility for property damage caused by water spillage.
Step 1
Step 2
Step 3
To Next Page
Loading...
Need help?
General
