Vicks V934 - User Manual

VICKS
®
Baby Thermometer
Model V934
READ AND SAVE THESE INSTRUCTIONS
Thank you for purchasing the VICKS
®
Baby Digital Thermometer, a professionally accurate instrument for comfortably
measuring a baby's temperature. Please read these instructions carefully to ensure accurate temperatures and safe
operation. When used properly, this high quality thermometer will give you years of accurate, dependable use.
The VICKS
®
Baby Digital Thermometer (V934) is designed specifically for measuring rectal temperatures of babies.
IMPORTANT SAFETY INFORMATION

High, prolonged fever requires medical attention especially for young children. Please contact your pediatrician.

This product is not a toy. Do not allow child to play with it. Adult supervision is required in the use of this
product.

This product is designed to measure human body temperature. Do not use it for any other purpose.
If you have any questions or comments about the VICKS
®
Baby Digital Thermometer, call our
toll-free Consumer Service Line: 1-800-477-0457.
TEMPERATURE READINGS
Temperature readings vary from person to person. Although there is no one “normal” temperature reading, a
temperature, taken rectally, ranging between 98-100.4°F is considered normal.
The best method to determine your baby’s normal temperature is to use the thermometer when they are feeling
well. Record the temperature twice a day (early morning and late afternoon). Take the average of the two
temperatures. This is considered your baby’s normal body temperature. Any variation from it may indicate some
sort of illness and you should consult your pediatrician.
Note: This method produces a temperature approximately 1° higher than a temperature taken orally and 2° higher
than a temperature taken under the arm.
BEFORE USE
Your VICKS
®
Baby Digital Thermometer is designed specifically for rectal use. It is recommended that for 15
minutes prior to use, your child should avoid eating or drinking any liquids, physical activity, or bathing.
OPERATING YOUR VICKS
®
BABY
DIGITAL THERMOMETER
Press the On/Off button to activate the thermometer. A beep will sound and the
display will come on. The display will first show the LCD display test (Fig. 1) and then
show the last reading. After 5 seconds, the display will be in the ready mode (Fig. 2)
and the display light will go off.
FOR RECTAL USE
Use for babies, young children, or when it is difficult to take an oral or underarm temperature. Important: For
sanitary reasons, once this thermometer has been used for a rectal reading, do not use it for an oral reading. Clean
it thoroughly before using again or on a different child.
1. Lubricate the tip with a water-soluble jelly for easier insertion. Do not use a petroleum jelly. Read the label of the
lubricant to be sure you are using the right kind.
2. The proper position for a baby is to lay on its stomach with legs hanging down, either across your knees or at
the edge of a bed or changing table. This positions the infant’s rectum for safe and easy insertion of the
thermometer.
3. Gently insert the tip of the thermometer NO MORE THAN 1/2 inch into the rectum. The guard above the tip is
designed to prevent over-insertion. If you detect resistance, stop. Hold the thermometer in place during
measurement.
4. When the peak temperature is reached (usually 10 seconds) 10 beep signals will sound and the “°F” sign will
stop flashing and the display light will come on. The temperature is now ready to read and will not change when
the thermometer is removed.
5. Turn the thermometer off by pressing the On/Off button. The display light will come on automatically to
illuminate the last reading, then unit will power off. If you forget to turn it off, the thermometer will automatically
turn off after approximately 9 minutes.
Reminder: Wash the thermometer as recommended before placing it back in the storage case. See instructions
below.
- - -
°
F
188.8
°
F
M

Fig. 1
Fig. 2
Probe tip Battery
Compartment
(on side)
LCD display
On/Off Button
Insertion guard

Summary

Vicks Baby Thermometer Instructions

Important Safety Information

Key safety precautions for using the baby thermometer, including not using it as a toy.

Temperature Readings Guide

Explains normal temperature ranges and how to determine a baby's baseline normal temperature.

Preparation Before Use

Recommendations for preparing the child before taking a rectal temperature.

Operating the Digital Thermometer

Step-by-step guide on how to activate and use the Vicks Baby Digital Thermometer.

Rectal Use Instructions

Specific instructions and important precautions for taking rectal temperatures.

Underarm (Axillary) Use

Underarm Temperature Measurement

Instructions for taking a temperature reading under the arm.

Thermometer Features and Maintenance

Automatic Night Glow Display

Description of the automatic display illumination feature.

Recall Last Temperature

How to view the last recorded temperature on the thermometer display.

Cleaning Instructions

Proper methods for cleaning the thermometer sensor and body.

Changing the Batteries

Guide on how to replace the thermometer's long-life battery.

Specifications and Warranty

Product Specifications

Technical details including battery life, accuracy, temperature range, and beeper function.

Lifetime Warranty Information

Details about the product's lifetime warranty and how to get service.

Vicks V934 Specifications

Battery

battery life	more than 200 hours
battery type	SR41, LR41, or equivalent
battery replacement indicator	" " appears in the lower right of the display

Temperature Measurement

accuracy	+/- 0.2°F between 96.0-107.0°F
temperature range	90.0°-109.9°F
beeper duration	approximately 8 seconds