Vicon V960-N Series User Manual

Quick User Guide V960-N Series Network Camera
1
Warning before installation
-Power off the Network camera if it is found to be smoking or smells unusual.
-Keep the Network camera away from water. If the Network camera gets wet, power
off immediately.
-Do not place the Network camera near heat sources, such as a television or oven.
-Refer to your instruction manual for the operating temperature.
-Keep the Network camera away from direct sunlight.
-Do not place the Network camera in high humidity environments.
-Do not place the Network camera on unsteady surfaces.
-Do not touch the Network camera when there is lightning present.
-Do not disassemble the Network camera.
-Do not drop the Network camera.
-Do not insert any object into the Network camera, such as a screwdriver.
For other safety and regulation information, please refer to User’s manual.
1. Check Contents
No.
Item
Description
1
Network Camera
V960-N Series (V960-N, V961-N, V962-N)
2
Software CD
User’s Manual, Utility software
3
Quick User Guide
This document
4
Accessories
Mounting bracket
Screws for mounting bracket
C-mount adapter ring
DC jack adapter
Dust protection cap
Terminal block connector
Allen wrench
2. Physical Description
Rear View
1. Alarm In/Out, Audio In/Out (use terminal block connector)
2. Video Out
3. Micro SD card (SDHC supported)

Vicon V960-N Series Specifications

General

Lens Mount	M12
Day/Night	Yes
Operating Temperature	-30 °C to 60 °C (-22 °F to 140 °F)
Camera Type	IP Camera
Sensor Type	CMOS
Lens	Varifocal
Minimum Illumination	0 Lux with IR
IR Range	Up to 30 meters
IR Cut Filter	Yes, with auto switch
Video Compression	H.264, H.265, MJPEG
Frame Rate	Up to 30fps
Ethernet	10/100 Mbps
Power Supply	PoE (802.3af)