Vicon VC2500-DSP - Lens Mounting and Backfocus

CONNECTORS AND CONTROLS- 8 @ @
0 C-MOUNT ADAPTER RING
The C-mount adapter ring is used if a C-mount lens is used on
the camera. If a CS-mount lens is used, the ad;
necessary.
To install the adapter,
first screw it into the
opening on the camera. Then screy the C-mount I
adapter,
:’
. . . . . . .
. . . . . . . . . . . . . .
II
3pter is not
lens mount
ens into the
CAMERA
LENS
‘C MOUNT ADAPTER RING
@I CCD DUST PROTECTIVE CAP.
Remove this cap just before installing the lens,
Do not handle or leave the camera with this cap open.
@ CAMERA MOUNT HOLE.
.
- 12 -