2
Viconics Technologies
028-0465-00 October 2015
Integration with GW2 Gateway
This document shows how the GW2 integrates wireless solutions to a wired building automation system.
The GW2 is interoperable with any BACnet compliant building management system and can communicate with ZigBee Pro devices.
No Software or Server is required. The procedures in the document show you how to integrate the VT7000 and VT8000 Series Room
Controllers with the GW2.
The following must be performed to successfully integrate the GW2 with any Room Controller:
1. Login to Building Expert
2. Configure Objects in Building Expert
3. Add VT7000/ VT8000 Series Room Controller
BACnet Controller
To Next Page
Loading...