Victa VPLV0226 User Manual

7
QUICKSTART
Quick Start Guide
CAUTION! ENSURE FEET, LEGS & HANDS ARE CLEAR OF THE
IMPELLER COVER AND BLOWER TUBE/NOZZLE
• Pull the starter cord until you feel it resist.
Then tug sharply on the starter cord 2 or 3 times.
*
The engine may start or run for a short period set
on cold. Choke can be set to hot while the engine
is running.
• Now, set the choke lever to the "HOT" position.
• If r
equired, tug sharply on the starter cord 2 or 3
times or until the engine starts
* *
In cold conditions, the engine may require 5-10
seconds running at idle. Pulling the trigger during
warm-up may help starting.
3 – Go!
3.
• Set STOP switch to
the “ON” position ( l )
• Set the choke lever to
"COLD" position
2 – Set
2.
2.
• Place the Blower on a hard, level surface.
• Press the PRIMER 10 times.
1 – Get ready…
1.
PRIMER
LR02390A-A.indd 8 22/07/2014 4:36:43 PM
Not for
Reproduction

Victa VPLV0226 Specifications

General

Brand	Victa
Model	VPLV0226
Category	Blower
Language	English