Victor 1240-3A Series User Manual

If the printing becomes faint, the ink roller may need to be replaced.
C. Replacing the Ribbon
1) Turn the power off.
2) Open the printer cover(Fig.III)
3) Remove the old ink roller by pulling it up (Fig.IV).
4) Replace the new ribbon (red to the bottom) by
Installing the spools in the reverse in the reverse
Sequence.
CAUTION:Turn the power off before replacing ink ribbon
Fig. I Fig. II
Fig. III Fig. IV

Victor 1240-3A Series Specifications

General

Brand	Victor
Model	1240-3A Series
Category	Calculator
Language	English