What to do if my Victorio Ice Maker shaves ice too slowly?
If your Victorio Ice Maker shaves ice very slowly or the snow texture is too fine, adjust the blade to a coarse setting. Also, ensure that you press down as the handle is cranked.
Why is the handle on my Victorio VKP1101 so hard to turn?
If the handle of your Victorio Ice Maker is very hard to turn, first, check that everything is assembled correctly according to the figure on page 1. Remember that this is a hand crank ice shaver, so some resistance is normal, especially for small children or those with weaker arm strength.
Why is the ice from my Victorio Ice Maker too coarse?
If the ice from your Victorio Ice Maker is too coarse or has large chips, always use the ice molds to make ice blocks for the finest snow. If you're using regular ice cubes, it's normal to get chips or chunks as the cubes can break up when shaving. Adjust the blade to a fine setting.
What to do if Victorio Ice Maker shaves ice very slowly or the snow texture is too fine?
If your Victorio Ice Maker is shaving ice too slowly or the snow texture is too fine, adjust the blade to a coarse setting. Also, make sure to press down as the handle is cranked.
To Next Page
General
