Victory FMM HD Series User Manual (English)

Questions and Answers:

R
Robin ChandlerAug 6, 2025
What to do if the PTO shaft is injured on my Victory FMM HD Lawn and Garden Equipment?
- L
  Leah BurchAug 6, 2025
  If the PTO shaft is injured on your Victory Lawn and Garden Equipment, several issues could be the cause. First, ensure it was assembled correctly. If not, re-assemble it. Also, make sure that you rinse the needle and pump grease sufficiently. Another potential cause is that the angle of the PTO shaft is too big or gripped; in this case, limit the rising position and re-lock it. Finally, verify that the flail mower isn't sharply falling down the soil; if it is, move the mower down smoothly.
S
Stacie BrownAug 12, 2025
Why is there noise in the gearbox of my Victory Lawn and Garden Equipment?
- L
  Laura ClarkAug 12, 2025
  Noise in the gearbox of your Victory Lawn and Garden Equipment can arise from several causes. It might be that the clearance between the two helical bevel gears is too large, so adjust this clearance. Another potential cause is a bearing injury, in which case you should replace the bearing. Finally, a broken gear tooth could be the culprit, requiring gear replacement.
T
Tyler MorrisonAug 17, 2025
What to do if there is trouble rotating the cultivator shaft on Victory Lawn and Garden Equipment?
- L
  lsanchezAug 18, 2025
  If you're experiencing trouble rotating the cultivator shaft on your Victory Lawn and Garden Equipment, several factors could be responsible. Start by checking if a gear or bearing is injured or gripped, and replace it if needed. Also, verify that there is proper clearance between the two helical bevel gears and adjust it if necessary. Additionally, inspect the left side plane for any deformities and correct them. Furthermore, check the cultivator shaft for crookedness or deformities, and correct or replace it. Finally, ensure the cultivator shaft isn't tangled with grass or heavily soiled; if so, clear away the grass or soil.
R
rebecca83Aug 23, 2025
How to fix noise in the driveshaft tube of Victory FMM HD?
- J
  Jessica HooverAug 23, 2025
  To address noise in the driveshaft tube of your Victory Lawn and Garden Equipment, consider these potential causes. First, check for any foreign material inside the driving tube and remove it from the axle housing. Additionally, inspect the bearing on the third shaft and the bearing on the central shaft for any damage, and replace them if needed.
L
Lisa NielsenAug 30, 2025
Why is the PTO shaft inclined too much on my Victory FMM HD?
- J
  Jamie HarperAug 30, 2025
  An excessive inclination of the PTO shaft on your Victory Lawn and Garden Equipment may be due to: * The flail mower not being horizontally level. Adjust the horizontal level of the mower. * One side sway chain of the tractor being too short. Adjust the chain.

Victory FMM HD Series Specifications

General

Brand	Victory
Model	FMM HD Series
Category	Lawn and Garden Equipment
Language	English

Summary

Colophon

Addresses

Contact and location details for the manufacturer.

Manual Information

Details about the manual's origin, language, and reproduction policy.

History of Changes

Records the version history and updates made to the operator's manual.

Preface

Identification

Describes the Victory FMM mower and its key characteristics.

CE Type Plate

Explains the information provided on the machine's CE compliance plate.

Victory Tractor Implements Warranty

Warranty Provisions

Details the terms, duration, and coverage of the product warranty.

Liability

Defines the manufacturer's liability limitations and exclusions.

Introduction

About This Manual

Introduces the manual's purpose and emphasizes safety reading.

Manual Update

Informs about revisions and improvements made to the manual's version.

Explanation Documentation

Guides users on which manual sections are critical for their roles.

List of Abbreviations

Provides a glossary of terms and acronyms used in the manual.

Safety Warning Messages

Explains the meaning of safety symbols like DANGER, WARNING, and CAUTION.

Intended Users

Specifies that the equipment is for trained and skilled operators.

Intended Use

Defines the proper application and purpose of the flail mower/mulcher.

Unintended Use

Clarifies what constitutes improper or unauthorized usage of the machine.

Intended Operating Conditions

Lists environmental and operational parameters suitable for the equipment.

Tools, Parts, and Accessories

Lists required tools and accessories for assembly and adjustments.

Safety

Introduction to Safety

Stresses the importance of understanding instructions for safe operation.

General Applicable Safety Rules

Lists fundamental safety measures applicable to all operations.

Personal Protective Equipment (PPE)

Details the necessary safety gear for operators.

General Safety Rules for Machines

Covers broad safety practices for machine operation and maintenance.

Additional Safety Rules for Flail Mower/Mulchers

Provides specific safety guidelines for this type of equipment.

More Safety Tips for Safe Operation

Offers extra advice to enhance operational safety.

Rules For Safe Transport On Public Roads

Outlines guidelines for safe transportation on public roads.

Keep Riders Off Machinery

Prohibits unauthorized persons from riding on the equipment.

Practice Safe Maintenance

Emphasizes safety procedures during maintenance tasks.

Prepare For Emergencies

Advises on emergency preparedness and necessary supplies.

Safety and Health Measures for Hydraulic Fluid

Covers precautions for handling hydraulic fluids safely.

Driveline Safety

Focuses on safe driveline application, installation, and hazard reduction.

Not Allowed Use

Specifies prohibited activities and modifications for the mower.

Safety Decals and Markings

Highlights the importance of safety decals and their upkeep.

Safety for Starting and Stopping

Provides critical steps for safe engine and mower start-up and shutdown.

Calamities

Addresses unintended events and operator responsibility for machine safety.

Operation Instructions

Warnings and Rules for Safe Operation

Lists critical warnings and rules for safe mowing operation.

Human Factors

Discusses the operator's role in preparing and starting the equipment.

Operator Knowledge and Skills

Defines the expertise required for operating the FMM mower.

Workplace Requirements

Outlines the necessary workspace conditions and clearances.

Preparing for Commissioning and Assembling

Guides the user through the setup and assembly process.

Operating Instructions

Provides specific guidance for operating the PTO shaft and mower.

Operating Preparation Steps

Details pre-operation checks and considerations, including noise.

Operation Procedure

Describes the step-by-step process for engaging and using the mower.

Hydraulic System

Other Activities

Height Adjustments

Details how to set mowing and roller heights for efficiency and wear reduction.

Rear Tines (Rakes)

Describes the function and use of adjustable rear tines for mulching.

Driving Belts Tension

Covers checking and adjusting the tension of the drive belts for optimal performance.

PTO Shaft Handling

Provides guidance on PTO shaft angle, lubrication, and extension length.

Ordering Parts

Instructions on how to order replacement parts from the manufacturer.

Maintenance, Adjustment, and Repair

Preventive Maintenance

Stresses the importance of regular inspections to prevent issues.

Service Procedures

Details lubrication and fluid requirements for servicing the machine.

Service Period Intervals

Outlines recommended maintenance schedules (daily, seasonal, annual).

PTO Shaft Maintenance

Explains the annual maintenance steps for the PTO shaft.

Gearbox Maintenance

Covers checks and maintenance for the gearbox components.

Cleaning Procedures

Provides instructions for cleaning the mower after use.

General Troubleshooting

Offers solutions for common operational problems.

Transport and Storage

Gives guidelines for safely transporting and storing the equipment.

Decommissioning and Environment

Covers end-of-life disposal and environmental considerations.

List of Consumables

Lists necessary oils and greases for the machine.

Spare Parts and Wearing Parts

Wearing Parts Identification

Lists components that are subject to wear and require regular replacement.

Exploded View Drawings

Torque Specifications

Provides a chart detailing correct torque values for various fasteners.

Specifications and Features

Technical Specifications

Lists detailed technical data for different FMM models.

Key Features

Highlights the main attributes and functionalities of the mower.

Victory FMM HD Series User Manual

Table of Contents