Need help?Do you have a question about the Victory Hammer 8-Ball and is the answer not in the manual?
General| Manufacturer | Victory |
|---|---|
| Model | Hammer 8-Ball |
| Category | Cruiser |
| Engine Type | 4-stroke 50° V-twin |
| Compression Ratio | 9.4:1 |
| Bore x Stroke | 101 mm x 108 mm |
| Transmission | 6-speed |
| Final Drive | Belt |
| Front Brake | Dual 300 mm floating rotors with 4-piston calipers |
| Horsepower | 97 hp |
| Fuel System | Electronic Fuel Injection |
| Front Suspension | Inverted telescopic fork, 130 mm travel |
| Rear Suspension | Single, rising rate linkage, preload adjustable, 100 mm travel |
| Rear Brake | 300mm floating rotor with 2-piston caliper |
| Front Tire | 130/70R18 |
| Rear Tire | 250/40R18 |
| Fuel Capacity | 17 liters |
An introduction to Victory Motorcycles and their product line.
Explains the purpose and importance of the owner's manual for safe operation.
Defines signal words (WARNING, CAUTION, NOTICE) and the safety alert symbol.
Provides general guidelines for safe motorcycle operation, including rider education.
Guidelines for safely carrying a passenger, including weight limits and instructions.
Emphasizes wearing helmets, eye protection, and other safety gear.
Explains the importance of not exceeding GVWR for stability and handling.
Guidelines for carrying cargo to prevent instability and loss of control.
Instructions for safe parking and transporting the motorcycle.
Guidelines for selecting and installing accessories to maintain stability and avoid hazards.
Crucial warnings about gasoline flammability, toxicity, and exhaust gas hazards.
Emphasizes performing recommended safety maintenance for handling and control.
Illustrates the location of various safety and information labels on the motorcycle.
Identifies components in the handlebar area and visible from the left side.
Identifies components visible from the right side of the motorcycle.
Explains the location and importance of VIN and engine identification numbers.
Explains the operation of the ignition switch and its positions.
Describes the speedometer and instrument cluster layout.
Explains the meaning and conditions for various indicator lamps.
Details how to use the multi-function display modes.
Instructions for changing display units between standard and metric.
Details how to retrieve and interpret engine error codes.
Explains the operation of left and right handlebar controls.
Explains operation of gear shift and rear brake pedals.
Covers sidestand, mirrors, fuel cap operation, and steering lock.
Emphasizes pre-ride inspections and details electrical system checks.
Instructions for checking engine oil, fuel, and brake fluid levels.
Covers tire pressure, condition, tread depth, and brake system inspections.
Details checks for throttle, clutch, suspension, steering, and drive belt.
Inspects sidestand operation, pivot bolt, wear, and chassis fasteners.
Guides for engine break-in period and safe fueling practices.
Step-by-step instructions for starting the engine and tilt sensor function.
Provides recommended shift points for upshifting and downshifting.
Guidelines for safe acceleration and braking techniques.
Steps for safely stopping the engine and parking the motorcycle.
Details periodic maintenance tasks and intervals based on mileage.
Covers drive belt condition inspection and tension measurement.
Procedures for checking rear wheel alignment and adjusting rear shock preload.
Inspects front forks for leaks, damage, and checks steering operation.
Covers fuel hose inspection and throttle system adjustments.
Details clutch lever freeplay, lubrication, and cable maintenance.
Covers brake fluid checks, pad inspection, and lever lubrication.
Covers tire pressure, condition, tread depth, and wheel inspections.
Provides spark plug recommendations, inspection, and replacement procedures.
Instructions for removing and installing seats for various models.
Instructions for adjusting handlebar position and repositioning controls.
Covers battery care, charging, installation, and fuse replacement.
Details headlight aim adjustment, lamp replacement, and sidestand lubrication.
Cleaning instructions for matte and suede finish paintwork.
Describes standard bucket wash and spray-rinse-and-ride washing methods.
Covers polishing aluminum, paint, chrome, and applying protectants.
Using Victory conditioner for leather, vinyl, and rubber components.
Guides for selecting a storage location and preparing the motorcycle.
Steps for battery care during storage and removal procedures.
Measures to deter rodents and use of motorcycle covers for storage.
Details the one-year limited warranty coverage, exclusions, and registration.
Instructions on how to obtain warranty service from an authorized dealer.
Technical specifications for various models regarding dimensions, weight, and capacities.
Technical specifications for various models regarding engine and chassis.
Technical specifications for various models regarding drive system, electrical, and tires.
Recommended fuel type, octane rating, and engine oil specifications.
Section to record important vehicle identification numbers.
A log for recording performed services, comments, mileage, and dates.
To Next Page