Victory 2009 VISION User Manual

Details about the manual's content, disclaimers, and definitions of terms.

Lists registered trademarks of Polaris Industries and other companies mentioned in the manual.

Explains safety signal words and symbols used throughout the manual for hazard identification.

Essential guidelines for safe motorcycle operation, including rider education and manual understanding.

Guidelines for safely carrying passengers and cargo, including weight distribution and handling.

Recommends wearing appropriate protective gear like helmets, gloves, and boots to reduce injury risk.

Warnings about unauthorized modifications and guidelines for safe accessory selection and installation.

Procedures for safely transporting the motorcycle and safety measures to follow during fueling.

Safety information regarding gasoline hazards, exhaust fumes, and the importance of periodic maintenance.

Explanation of Gross Vehicle Weight Rating (GVWR) and loading examples for safe operation.

Details the location and purpose of VIN, VECI, NECI, and Tire Information decals on the motorcycle.

Instructions on how to report vehicle safety defects to NHTSA and Polaris Industries.

How to locate and record Vehicle Identification Number (VIN) and Engine Number for reference.

Diagrams and lists identifying various motorcycle components from left, right, front, rear, top, and rider views.

Details the operation of the ignition key and switch positions for starting and accessories.

Describes the speedometer, tachometer, fuel gauge, and various indicator lamps on the instrument panel.

Explains the function of various switches on the console and handlebars for lighting, audio, and other features.

Details the operation of clutch, brakes, gear shift, throttle, and parking systems.

Instructions for operating the fuel door, fuel cap, and glove compartment.

Instructions for using the sidestand, saddlebags, and trunk.

Lists the tools included in the motorcycle's tool kit for basic maintenance.

Outlines essential checks to perform before operating the motorcycle for safety and readiness.

Procedures for inspecting indicators, lights, horn, and engine stop/run switch functionality.

Steps to check engine oil, fuel level, tire pressure, condition, and tread depth.

Procedures for checking brake operation, fluid levels, hoses, pads, and connections.

Inspecting front/rear suspension, steering, and drive belt for proper function and condition.

Checking sidestand, pad wear, fasteners, and mirrors for proper condition and adjustment.

General advice on operating the motorcycle for maximum performance and longevity.

Critical steps for seating engine parts properly during the initial 500 miles for durability.

Precautions for fueling and instructions to prime the fuel system if needed.

Detailed instructions for starting the motorcycle's engine, including safety features.

Guides on shifting gears, recommended speeds, upshifting, and downshifting techniques.

Safety information and instructions for setting, resuming, accelerating, and canceling cruise control.

Guidelines for proper braking techniques and safely stopping the motorcycle's engine.

Instructions for parking the motorcycle safely and operating the reverse system.

General advice, safety reminders, and precautions before performing maintenance procedures.

Information on the initial service and the periodic maintenance interval table.

Detailed instructions for changing the engine oil and oil filter.

Procedures for inspecting drive belt condition, tension, wear analysis, and adjustment.

Instructions for inspecting and adjusting rear suspension and drive belt/wheel alignment.

Procedures for checking and maintaining brake fluid and clutch fluid levels.

Inspecting brake discs, reverse idler port, gear shift pedal, and lubricating components.

Procedures for checking tire condition, tread depth, and pressure.

Instructions for inspecting and replacing spark plugs, and inspecting exhaust fasteners.

Precautions, charging, removal, and installation procedures for the motorcycle battery.

Procedures for servicing windshield trim panel, fuses, and replacing bulbs.

Important DOs and DON'Ts regarding the motorcycle's electrical system.

Safety precautions for lifting the motorcycle and performing a road test after service.

Torque values for various fasteners not specified elsewhere in the manual.

Guides for diagnosing and resolving common operational problems like starting or running issues.

Introduction to recommended products for cleaning, polishing, and preserving the motorcycle.

Detailed methods for washing the motorcycle, including bucket wash and spray-rinse methods.

Tips for quick cleaning and polishing paint, chrome, and aluminum surfaces.

Recommendations for conditioning and protecting leather, rubber, and vinyl parts.

General advice for storing the motorcycle, including area preparation and protection.

Steps to clean, protect, stabilize fuel, and care for the battery before storage.

Steps for removing the motorcycle from storage and preparing it for use.

Federal laws prohibiting tampering with noise control systems and related penalties.

Explanation of the emission control system warranty, coverage, and owner rights.

Owner's responsibilities, warranty limitations, and liability exclusions.

How to obtain warranty service, legal rights, and additional contact information.

Details the one-year limited warranty, coverage, and registration requirements.

Lists specific exclusions from warranty coverage and limitations on remedies.

Provides key dimensions, weight, capacities, and engine details for the 2009 VICTORY VISION.

Details for the motorcycle's chassis, suspension, brakes, and drive system components.

Specifications for wheels, tires, electrical system components, and lighting.

Recommended fuel type, octane rating, and engine oil specifications.

Guidance on obtaining the appropriate service manual for advanced procedures.

Introduces the audio system and lists radio frequencies for different regions.

Explains the primary controls and display elements of the audio system's interface.

Details the functions of the lower and upper left-hand controls for volume, tuning, source, and CB/ICOM.

Describes the controls available to the rear passenger for volume and CB transmit.

How to power the system on/off and use basic controls like volume, mute, source, and tuning.

How to use memory presets and adjust audio settings like bass, treble, fader, and external speakers.

Explains CB headset modes, ICOM volume, CB volume, and NOAA weather band functions.

Details on XM display settings, category selection, scan mode, and reception.

Getting started with the CB/ICOM system, including power and activation.

How to adjust CB channels and use the Push-to-Talk (PTT) button for communication.

Explanation and adjustment of squelch level and volume controls for CB and ICOM.

Location of headset receptacles for driver and passenger use with CB/ICOM.

Introduction to using AUX and iPod functions with the audio system.

Instructions for connecting AUX and iPod input cables to the audio system.

How to access iPod music libraries and playlists, and navigate tracks using console controls.

Introduction to XM Satellite Radio service and basic steps to get started.

Information on XM radio signal reception and the process for activating the service.

Introduction to using the CD changer with the motorcycle's audio system.

Instructions for inserting and removing CDs from the CD player cartridge.

How to access individual CDs in the changer using console preset buttons.

How to navigate forward/backward through CD tracks or fast forward/reverse.