53
INSTRUMENTS, FEATURES, & CONTROLS
Controls
Gear Position
The number of the current transmission gear is
displayed with the key in the ON position and
the Stop/Run switch in RUN. “N” displays in
neutral. “R” displays in reverse (if equipped).
Trip Odometer
The trip odometer shows total miles traveled
since the trip odometer was reset. Use the
MODE button to toggle between odometer and
trip meter. To reset the trip meter:
1. Turn the key to ON and toggle to the trip
meter.
2. Hold the MODE button until the trip meter
resets.
Temperature
Current ambient air temperature is displayed with the key in the ON or ACC position.
To Next Page