Victory 2009 VISION User Manual

188
MAINTENANCE
Maintenance
Headlamp Aim Adjustment
The headlamp adjustment knob can be accessed
through the opening in the headlamp housing
mount under the windshield trim panel.
1. Remove the windshield trim panel (page 184).
2. Reach through the opening in the headlamp
housing mount.
3. To LOWER the headlamp beam, turn the knob
CLOCKWISE (as viewed from the operator’s
seat).
4. To RAISE the headlamp beam, turn the knob
COUNTER-CLOCKWISE (as viewed from the
operator’s seat).
(Rear View)
Knob
Headlamp Adjuster Access
Raise
Lower
visionownersmanual.book Page 188 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches