Victory 2009 VISION User Manual

72
INSTRUMENTS, FEATURES, & CONTROLS
Controls
Front Brake Lever
The front brake lever is located on the right
handlebar.
To apply the front brake, pull the lever toward the
handlebar. As described on page 71, the front brake
lever activates only the front brake calipers.
See “Braking” on page 124 for braking procedures in
various riding conditions.
Lever “reach” or distance to the hand grip is
adjustable. To adjust the front brake lever reach:
• Pull the lever away from the grip (1) and hold.
• Turn dial (2) to align a lower number with the arrow
(3) on the lever to increase lever reach distance.
• Turn the dial to align a higher number with the
arrow on the lever to decrease reach distance.
1
3
2
visionownersmanual.book Page 72 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches