Victory 2009 VISION User Manual

143
MAINTENANCE
Maintenance
Air Filter
The standard VICTORY air filter element is a dry
paper design and does not require the use of air
filter oil. Inspect the air filter often if riding in
unusually wet or dusty conditions.
1. Remove the two air filter retaining screws.
2. Pull the lower edge of the filter toward the front
of the motorcycle then lower it to release the two
tabs at the top edge. Remove the filter.
3. Clean the filter sealing surface on the frame.
4. Install the new air filter, engaging the tabs at the
top of the filter with the filter case.
5. Install retaining screws.
6. Torque screws to 87 lb- in. (10 Nm).
Tabs
Screws
visionownersmanual.book Page 143 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches