Victory 2009 VISION User Manual

65
INSTRUMENTS, FEATURES, & CONTROLS
Controls
Turn Signal Switch
Use the turn signal switch to activate a turn signal. The
key must be in the ON or ACC position.
Turn signals automatically cancel after predetermined
speed and distance conditions are met. To manually
cancel a signal, move the switch to the center position
and press it inward
• Push the switch to the left to activate the left turn
signals.
• Push the switch to the right to activate the right turn
signals.
Turn
LEFT Handlebar Switch
visionownersmanual.book Page 65 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches