Need help?Do you have a question about the Victory Vegas Jackpot and is the answer not in the manual?
General| Final Drive | Belt |
|---|---|
| Front Suspension | Telescopic Fork |
| Rear Brakes | 300mm Floating Rotor with 2-piston caliper |
| Fuel System | Electronic Fuel Injection (EFI) |
| Cooling System | Air-cooled |
| Front Brakes | 300mm Floating Rotor with 4-piston caliper |
| Fuel Capacity | 4.5 gal / 17.0 L |
| Horsepower | 97 hp |
Explains the importance of the owner's manual for safe riding and maintenance.
Defines signal words like WARNING, CAUTION, NOTICE used for safety alerts.
General advice for riding safely and avoiding common risks.
Guidelines for safely carrying a passenger on the motorcycle.
Recommendations for wearing protective gear to reduce injury risk.
Importance of not exceeding the gross vehicle weight rating for stability.
Guidelines for carrying cargo to prevent instability and loss of control.
Guidelines for operating the motorcycle with saddlebags.
Instructions for proper parking to ensure motorcycle stability and safety.
Warnings about modifications affecting safety and warranty.
Guidelines for safely transporting the motorcycle.
Guidelines for selecting and installing accessories to maintain safety.
Safety precautions related to handling fuel and exhaust gases.
Importance of performing safety maintenance for safe operation.
Vehicle compliance with electromagnetic interference regulations.
Identifies various safety and information labels on the motorcycle.
Identifies components located in the handlebar area.
Identifies components visible from the left side of the motorcycle.
Identifies components visible from the right side of the motorcycle.
Details the location and importance of the Vehicle Identification Number (VIN).
Details the location of the Engine Identification Number.
Details the location of the ignition key identification number.
Instructions for proper installation of the license plate.
Explains the operation and positions of the ignition switch.
Overview of the instrument cluster and its display.
Explains the meaning and condition of various indicator lamps on the instrument cluster.
Details the modes and functions of the multi-function display.
Instructions on how to change display units between standard and metric.
Details the odometer, trip odometers, gear position, and clock functions.
Explains average fuel economy, instantaneous fuel economy, trip hours, and DC voltage.
Explains engine error codes and low oil pressure display.
Describes the operation of controls on the left handlebar.
Describes the operation of controls on the right handlebar.
Explains how to operate the gear shift pedal for changing gears.
Details the procedure for operating the sidestand and its interlock function.
Step-by-step instructions for opening and closing the fuel cap.
Explains how to use the steering lock for security.
Details pre-ride inspections for various electrical components.
Procedure for checking the engine oil level for proper operation.
Procedures for checking tire pressure, condition, and tread depth.
Check front brake lever function, reach adjustment, and fluid level.
Check rear brake pedal function, gap, and fluid level.
Inspect throttle rotation, freeplay, and cable condition.
Check clutch lever freeplay and lubrication.
Inspect front and rear suspension for leaks or damage.
Check drive belt tension and condition.
Inspect sidestand operation and chassis fasteners.
Procedures for breaking in the engine during the first 500 miles for optimal performance.
Instructions for proper fueling and priming the fuel system.
Step-by-step procedure for starting the motorcycle's engine.
Instructions on how to shift gears for acceleration and deceleration.
Safe techniques for accelerating and applying brakes.
Procedure for safely stopping the motorcycle's engine.
Instructions for proper parking to ensure motorcycle stability and safety.
Procedures for the first service at 500 miles for optimal engine performance.
Information on major repairs requiring technical skills and special tools.
A table outlining recommended periodic maintenance intervals.
Step-by-step guide for changing the engine oil and filter.
Procedures for inspecting, cleaning, and adjusting the drive belt.
Procedure to ensure proper rear wheel alignment for safety and belt life.
Procedure to adjust rear shock preload for optimal handling and safety.
Procedure for inspecting the front forks for leaks or damage.
Procedures for throttle freeplay adjustment and cable lubrication.
Procedures for clutch lever freeplay adjustment and lubrication.
Procedures for checking brake fluid levels and components.
Procedures for tire replacement, pressure, tread depth, and condition.
Recommendations and procedures for spark plug inspection and replacement.
Procedures for removing and installing seats for various models.
Procedures for battery removal, installation, and charging.
Procedure for replacing blown fuses in the fuse box.
Procedures for inspecting and adjusting headlight aim for safety.
Lubrication procedure for the sidestand pivot.
Cleaning instructions for matte clear coat finishes to avoid damage.
Information about suede paint finish and its unique properties.
Conventional method for washing the motorcycle using a bucket and wash mitt.
Quick cleaning method for washing the motorcycle without extensive rinsing.
Using spray detailer for quick cleaning between washes.
General guidance on polishing paint, chrome, and aluminum.
Instructions for cleaning and polishing polished aluminum components.
Method for polishing paint and chrome surfaces for a glass-like shine.
Advanced polishing for durable, long-lasting protection.
Using conditioner on leather, rubber, and vinyl for protection.
Guidelines for selecting and preparing a suitable storage location.
Steps to clean and protect the motorcycle before storage.
Instructions for using fuel stabilizer for storage.
Procedures to protect the engine during storage.
Instructions for checking and adjusting tire pressure for storage.
Procedures for maintaining the battery while the motorcycle is stored.
Using covers and deterrents for protection during storage.
Steps to take when removing the motorcycle from storage.
Details the limited warranty policy for VICTORY motorcycles.
Instructions and requirements for warranty registration.
Outlines what is covered and excluded under the warranty.
Instructions on how to obtain warranty service from a dealer.
Technical specifications for the HAMMER model.
Technical specifications for the VEGAS JACKPOT model.
Technical specifications for VEGAS 8-BALL, HIGH-BALL, JUDGE, BOARDWALK.
Recommended fuel type and octane rating for optimal performance.
Recommended engine oil type and viscosity for the motorcycle.
Location of VIN, Engine ID, Key Number, and Model Number.
To Next Page
