Victory 2009 VISION User Manual

129
MAINTENANCE
Maintenance
Maintenance
Guidelines
This section includes basic maintenance information for maintaining your motorcycle.
Included is a Periodic Maintenance Interval chart, which outlines the regular service
required to keep your motorcycle in the best operating condition. Regular service
increases motorcycle durability, safety, and dependability, and it provides greater riding
pleasure. Also refer to the safety-related maintenance information beginning on page 25.
Before you begin any maintenance procedure, read the instructions for the entire
procedure. Then you can decide whether you have the time, tools, and mechanical ability
to complete a procedure properly. Choose a flat, firm surface for servicing the motorcycle.
During maintenance you might use products that are potentially hazardous; such as oil or
brake fluid. When using any of these products, follow the instructions and warnings on the
product packaging. Review and comply with ALL Warnings on the following pages.
Some maintenance procedures and repairs require advanced technical skills and special
tools. Your VICTORY dealer has the equipment and training required to properly perform
all maintenance, service, repairs, and emission system related service.
visionownersmanual.book Page 129 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches