Victory 2009 VISION User Manual

186
MAINTENANCE
Maintenance
Fuse Replacement
1. Remove the windshield trim panel (page 184).
NOTE:
The reverse system fuse is located on the left
rear side of the motorcycle, under the seat
.
2. Push center of darts upward and remove the
fuse box cover panel(s).
3. Pull the tabs to release the cover(s).
NOTICE:
Use only the recommended fuse to prevent
electrical system damage. Fuse application
and size is printed on the cover label.
Push Center UP
Right Fuse Box
Left Fuse Box
Reverse System
25 amp mini fuse
visionownersmanual.book Page 186 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches