Victory 2009 VISION User Manual

161
MAINTENANCE
Maintenance
Throttle Control Inspection
With the engine OFF, rotate the throttle control grip
fully open and then release it.
1. Repeat the twist and release process with the
handlebars turned fully RIGHT and fully LEFT.
2. Verify that the throttle grip moves smoothly
throughout the range of motion and returns to its
rest position freely and completely when
released.
3. Remove the triangular cover from the right side
of the motorcycle by pulling straight outward at
each corner to release the three tabs. Inspect
cables for frayed ends. Contact your VICTORY
dealer if throttle operation is not smooth, if the
throttle grip does not return properly, or if cable
ends are frayed.
Cable Area
visionownersmanual.book Page 161 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches