Victory 2009 VISION User Manual

85
PRE-RIDE CHECKS
Pre-Ride
Pre-Ride Checks
Before Each Ride
Perform the checks described in this section before each ride to keep your motorcycle in
good operating condition. This is specially important before making a long trip or when
removing the motorcycle from storage. You must be familiar with the instruments and
controls on your motorcycle to make these checks. When inspections reveal the need for
adjustment, replacement or repair:
• refer to the maintenance section of this manual
• refer to the service manual
• or see your authorized VICTORY dealer
NOTE:
During the pre-ride check you may use products that are potentially hazardous, such as oil
or brake fluid. When using any of these products, always follow the instructions and
warnings on the product packaging.
WARNING
Failure to perform the recommended pre-ride checks could result in component failure
while riding, which could result in serious injury or death. Always perform the pre-ride
checks before each ride. When inspection reveals the need for adjustment, replacement or
repair, perform the service promptly.
visionownersmanual.book Page 85 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches