Victory 2009 VISION User Manual

88
PRE-RIDE CHECKS
Pre-Ride
Check Engine Oil Level
A dipstick attached to the oil fill cap registers the engine
oil level.
1. With the transmission in neutral, start and run the
engine for several minutes to bring it to operating
temperature.
2. Shut the engine off and wait for 3-5 minutes.
3. Straddle the motorcycle on level ground and bring it
to a vertical position.
4. Remove the oil fill cap/dipstick (1) and wipe it clean.
Reinstall the dipstick and turn the cap clockwise
until it seats.
Approx. 1/2 qt.
1
visionownersmanual.book Page 88 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches