Victory 2009 VISION User Manual

48
INSTRUMENTS, FEATURES, & CONTROLS
Controls
Ignition Switch
Place the ignition key in the ignition switch to operate the following functions of the switch.
IGNITION SWITCH FUNCTION
OFF All electrical circuits are off. The ignition key can be removed.
ON
All electrical circuits are on. The ignition key cannot be removed. Taillight, running
lights, radio and instrument lights illuminate. Headlight can be turned on by either
tapping or pressing the start button. Hazard flashers and turn signals can be activated.
ACC
Power is supplied to accessory circuits, radio, instruments, turn signals, brake light,
windshield motor, horn and hazard (flasher). The key can be removed.
LOCK
All electrical circuits are off. The ignition key can be removed. The glove compartment
is locked when the steering is locked.
FUEL
DOOR
See page 77.
visionownersmanual.book Page 48 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches