Victory 2009 VISION User Manual

155
MAINTENANCE
Maintenance
Swing Arm / Rear Axle Inspection
1. Sit in the operator’s seat and bounce the rear
suspension a few times, checking for free
movement without binding. Listen for abnormal
noises.
2. Safely elevate and support the motorcycle with
the rear tire 1-2 inches off the floor (see
page 200).
3. Grasp the rear-most surface of the rear tire and
attempt to move the wheel side to side. If there
is movement at the front of the swingarm, check
the swingarm pivot nut torque and swingarm
pivot bearings.
4. Contact your VICTORY dealer for service if you
detect noise or movement at the swingarm pivot.
visionownersmanual.book Page 155 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches