Victory 2009 VISION User Manual

156
MAINTENANCE
Maintenance
5. Grasp the top or bottom surface of the tire and
try to move it side to side. If there is movement
at the rear axle, inspect wheel bearings and rear
axle nut torque.
6. Contact your VICTORY dealer for service if you
detect noise or movement at the wheel bearings.
7. With the transmission in neutral, slowly rotate
the rear wheel. If the wheel does not rotate
smoothly, have your VICTORY dealer inspect
the wheel bearings, drive belt adjustment, wheel
alignment, or rear brakes as required.
Check for movement in
wheel bearing area.
visionownersmanual.book Page 156 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches