Victory 2009 VISION User Manual

37
IDENTIFICATION
I.D.
Identification Numbers
Vehicle Identification Number
The Vehicle Identification Number is printed on
the Manufacturer Information Decal located
under the rear console cover on the frame.
See “Seat Removal / Installation” on
page 190.
Record this number in the space provided on
page 40 and have it available as it is
sometimes required when ordering parts or
accessories.
The VIN is also stamped into the right side of
the frame near the steering head.
VIN on frame
Manufacturer (VIN) Decal under cover
4component identification.fm Page 37 Tuesday, February 3, 2009 12:54 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches