216
CLEANING
Cleaning
Leather, Rubber and Vinyl Care
For the finest leather care, use Pure VICTORY Leather, Vinyl & Rubber Conditioner, a unique,
pleasantly scented formula of premium-quality polymers designed to restore luster and softness to
vinyl, leather and rubber without making them slippery.
This product is a true conditioner, not a coating. It does not close the pores of the surfaces but
penetrates, nourishes and softens the material. It protects against ultra violet (UV) rays and
cracking, repels water and prolongs the life and like-new appearance of the materials. Applied to
rubber, this product creates a water-repellent, like-new appearance. This product can also be used
to restore or maintain the factory finish on a VICTORY VISION instrument panel/dash and rear
storage compartment black vinyl surfaces. Regular use increases soil resistance.
1. Apply the product on a clean dry surface using a soft cloth.
2. Rub the product into the material. Repeat the treatment if the surface is extremely dry.
3. Wipe dry with a second cloth to remove excess product. Buff lightly with the second towel for
additional luster.
Never use a non-recommended protectant on seats, footrests, hand grips or tires. Slippery seats,
footrests or hand grips can cause loss of control. Slippery tires can cause loss of traction and loss of
control. Both situations could result in serious injury or death.
visionownersmanual.book Page 216 Wednesday, February 13, 2008 4:31 PM
To Next Page
Loading...
Need help?
General
