Victory 2009 VISION User Manual

215
CLEANING
Cleaning
Polishing the VICTORY Motorcycle
Premium Polishing for Long-Lasting Protection
This newer style of polishing paint and chrome utilizes the latest in high-quality polymer technology
that provides the longest-lasting protection available in the polish industry today. Pure VICTORY
Liquid Spray Wax for Windshields, Paint & Chrome is formulated for polishing after washing and can
be sprayed on wet or dry surfaces. Liquid Spray Wax quickly produces a durable, high-gloss shine
with minimal effort. It contains NO ABRASIVES and is clear coat-safe. It contains NO PETROLIUM
DISTILLATES or SILICONES.
1. Shake container well before use.
2. Begin by washing and rinsing the motorcycle.
3. Spray Liquid Spray Wax on a wet or dry bike, one section at a time. (For best results, the bike’s
surface should be cool.)
4. Wipe dry one section at a time with Pure VICTORY Microfiber Chamois or microfiber towel.
5. When finished drying, buff the entire motorcycle with a clean, dry Pure VICTORY Microfiber
Polishing Towel for a clean and luxurious shine.
NOTE:
Liquid Spray Wax can also be applied to clean and dry clear coats, windshields and chrome. Apply to
one section at a time and wipe dry. When finished, use a second towel to buff to a luxurious, long-
lasting shine.
visionownersmanual.book Page 215 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches