Victory 2009 VISION User Manual

39
IDENTIFICATION
I.D.
Ignition Key Number
The ignition key number is stamped on the
small metal tag (1) attached to the key ring.
Remove the tag and record the number on
page 40. Store the tag in a safe place.
Additional keys can be copied from one of the
original keys (VICTORY key blank required).
If you lose both original keys, you will need the
following:
• Key number (recorded previously)
• A new key blank (purchased from your
VICTORY dealer)
• Proof of ownership
• A lock smith or VICTORY dealer with the
equipment necessary to cut a new key
1
4component identification.fm Page 39 Tuesday, February 3, 2009 12:54 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches