Victory 2009 VISION User Manual

102
PRE-RIDE CHECKS
Pre-Ride
Check Drive Belt
The drive belt should fit tightly. Check drive belt
tension (see page 147). The drive belt system must
be cool, clean, and dry to accurately measure belt
tension (deflection). Do not measure or adjust the
drive belt when the belt or drive system is wet or
when it is hot, such as immediately after riding.
Check the drive belt teeth for stones or other debris.
Replace the drive belt if it is cracked, has broken
teeth, missing teeth, or frayed edges (see the
service manual or an authorized VICTORY dealer).
Drive Belt
visionownersmanual.book Page 102 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches