Victory 2009 VISION User Manual

189
MAINTENANCE
Maintenance
Sidestand
Periodically lubricate the sidestand pivot and the
ends of the spring. Refer to page 103 to inspect
the sidestand and pivot bolt.
Sidestand Pad
Inspect sidestand pad for wear (see page 104).
Fasteners
Visually inspect the chassis and engine for loose,
broken or missing fasteners. Replace stripped,
damaged or broken fasteners with genuine
VICTORY hardware of equal size and strength
immediately. Tighten fasteners to the proper
torque (see page 201).
Refer to the service manual for torques not
included in this Maintenance section (or in the
illustration on page 201) or contact an authorized
VICTORY dealer.
Sidestand Pivot
Sidestand Pad
Seat Bolts
visionownersmanual.book Page 189 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches