Victory 2009 VISION User Manual

89
PRE-RIDE CHECKS
Pre-Ride
5. Remove the dipstick and read the oil level.
6. If necessary, add or remove oil to bring the level into
the area on the dipstick above the ADD mark and
below the FULL mark. See “Engine Oil
Specification” on page 248.
WARNING
Do not operate the motorcycle with the oil level above
the FULL mark or below the ADD mark. Operating the
engine with too much or too little oil can cause serious
engine damage or engine seizure, resulting in loss of
control.
Approx. 1/2 qt.
visionownersmanual.book Page 89 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches