Victory 2009 VISION User Manual

205
MAINTENANCE
Maintenance
Troubleshooting
Shifting Difficulties or Hard to Find Neutral
Brake Noise / Poor Brake Performance
NOTE:
Contact a VICTORY dealer if brake performance does not return after these inspections.
Possible Cause Possible Remedy/Action
Shift Linkage Bushings Dry Or Worn Lubricate shift linkage.
Engine Oil Level Incorrect Or Wrong Type Inspect level and quality of oil (page 140).
Hydraulic Clutch Fluid Contaminated Flush hydraulic clutch fluid (see dealer).
Air In Hydraulic Clutch System Bleed system (see dealer).
Clutch Slave Cylinder Bracket Loose Inspect / tighten loose parts.
Hydraulic Clutch Fluid Leak Inspect system for leaks (see dealer).
Clutch Damage Replace clutch
Possible Cause Possible Remedy/Action
Dust / Dirt On Brake Disc(s) Clean disc (page 172).
Worn Pads Or Brake Disc / Disc Damage Inspect pads (page 96) / disc (page 172).
Brake Fluid Level Low Or Fluid Contaminated Inspect fluid level / fluid (page 168-171).
visionownersmanual.book Page 205 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches