Victory 2009 VISION User Manual

104
PRE-RIDE CHECKS
Pre-Ride
Check Sidestand Pad Wear
The sidestand pad is a wear item and must be
inspected before each ride and replaced if worn.
The sidestand pad is designed to move the stand to
the stored position if the stand is inadvertently left in
the down position.
Check the condition of the sidestand rubber pad (1),
and make sure it’s firmly attached to the sidestand.
Check the wear indicator (2) on the leading edge of
the sidestand rubber pad. Replace the pad if worn
beyond the WEAR LIMIT line on the pad.
1
2
visionownersmanual.book Page 104 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches