Victory 2009 VISION User Manual

172
MAINTENANCE
Maintenance
Brake Disc Inspection & Cleaning
Check brake pads for wear as outlined on page 96.
Visually inspect front and rear brake discs for nicks,
scratches, cracks, or other damage. Inspect the thickness
of each disc in at least four different points around the
disc. If any disc is worn to minimum thickness at the
thinnest point, or if damaged, contact your VICTORY
dealer for replacement.
Clean discs if minor squeaks develop due to dirt or dust.
Apply VICTORY Brake Cleaner (P/N 2872191) to a clean
shop towel and wipe disc. DO NOT allow brake cleaner to
contact painted or plastic parts. Read all precautions on
the label.
Brake Hoses and Connections
Inspect all brake hoses and connections. If leaks or stains from leaking or dried fluid are
evident, see your VICTORY dealer for service.
Minimum Thickness
Front: 4.5 mm
Rear: 6.5 mm
visionownersmanual.book Page 172 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches