Victory VP300ES - User Manual

Backpack Quick Start Guide
See full manual for more detail
Register sprayers with serial number & date
code via website or app.
Charge Battery Remove & Fill Tank Connect Tank
1. Any excess moisture on
the tank should be wiped
away before replacing
tank into housing
2. Lower the tank onto the
backpack base unit
3. Secure tank by pressing
down on latch at top
of unit
Nozzle Settings
The optimum sprayer distance is 4–6 feet
(1.22–1.83 m) from surface being sprayed
Spray in an “S” like fashion from top to
bottom of surface areas
Start at opposite end of room & progress
toward the door to avoid walking through
spray pattern & touching sprayed surfaces
1. Unlatch tank release by
lifting upward
2. Remove tank by lifting
upward and outward from
the backpack base
3. Fill tank with water-based
chemical that is approved to
be sprayed
4. Follow any recommended
PPE requirements for
handling and using chemical
per the Safety Data Sheet
A fully charged battery will
spray up to 4 hours before
needing to be recharged
Clean & Store Daily
• All users should follow safe cleaning practices to protect
themselves from harmful exposure when cleaning
the sprayer
• Review chemical MSDS sheet for how to secure and store
your chemical solution when not in use
• Remove all chemical from tank and ush with water
• Spray water through each nozzle size for at least
30 seconds
SPRAYER START UP
SPRAYER USE
Cleaning Nozzle
Electrostatic Discharge (ESD)
If nozzle becomes plugged, soak in hot soapy water and blow
pressurized air through to remove blockage
Utilize nozzle extension for better control
and reduce amount of back-spray on the
handle and user
Maintain proper grip of handle to ensure
contact to grounding strip on trigger
Hands should remain dry
during operation
To reduce any static build up in the user,
the user’s free hand should be used to
touch grounded surfaces that have not
been sprayed (e.g. metal components of
adjacent equipment)
Current
Battery
Charge
4-6’
Remaining
Time Until
Fully Charged
In environments less conducive to natural
electrostatic charge dissipation, ESD events
may occur, resulting in a mild static shocking
sensation for the operator. To avoid this,
operators should maintain a rm grip on
the handle grounding strip & frequently
touch objects that are not being sprayed to
dissipate the negative charge that builds up
during sprayer use.
Change
setting
To insert or
remove
Turn one-quarter turn
counterclockwise to insert nozzle
Turn clockwise until you hear a
click to change setting
Select particle size for your
chemical’s dwell time* & application:
110 microns | 15 min
80 microns | 10 min
40 microns | 5 min
*Average dwell times may vary based on
humidity, temperature, spray speed
and distance.
VP300ES
Always
use nozzle
wrench when
changing nozzle
victoryinnovations.com
(800) 741-7788

Summary

Sprayer Start Up

Charge Battery

A fully charged battery provides up to 4 hours of spray time before recharging is needed.

Remove and Fill Tank

Procedure to unlatch, remove, fill the tank with approved water-based chemical, and follow PPE requirements.

Connect Tank

Wipe excess moisture, lower tank onto base, and secure by pressing the latch until it clicks.

Nozzle Settings

Use nozzle wrench to insert/remove; turn clockwise to change settings and select particle size for application.

Sprayer Use and Safety

Spraying Technique

Maintain 4-6 ft distance, spray in 'S' pattern from top to bottom, and move away from sprayed surfaces.

Nozzle Extension and Grip

Use nozzle extension for control, maintain grip on grounding strip, and keep hands dry during operation.

Electrostatic Discharge Precautions

Touch grounded surfaces to reduce static build-up and avoid shocking sensations.

Daily Cleaning and Storage

General Cleaning Procedure

Review MSDS, remove chemical, flush tank with water, and spray water through nozzle sizes for 30 seconds.

Nozzle Cleaning

Soak plugged nozzles in hot soapy water and clear blockage with pressurized air.

Victory VP300ES Specifications

General

Brand	Victory
Model	VP300ES
Category	Paint Sprayer
Language	English