Do you have a question about the Victory VX The Kraken and is the answer not in the manual?
Type | Tube |
---|---|
Number of Channels | 2 |
Wattage | 50W |
Impedance | 4, 8, 16 ohms |
Footswitchable | Yes |
Effects Loop | Yes |
Controls | Bass, Middle, Treble |
EQ Controls | 3-band |
Dimensions | 342 x 185 x 185 mm |
Speaker Configuration | Head - No speakers included |
Essential safety guidelines for amplifier usage, including avoiding liquids and unauthorized servicing.
Conditions that necessitate unplugging the amplifier and seeking professional servicing.
Cautionary note regarding hot valves and the need for caution when moving the amp.
Details on the input jack and the Gain I control for tone shaping and overdrive.
Switches between two different gain ranges, also foot-switchable.
Explanation of Bass, Middle, Treble EQ and Master I/II volume controls for tone shaping.
Functions like Master I, allowing different volume levels and solo boost with footswitchable gain settings.
Controls amp power output (High ~50W, Low ~8W) and standby mode for valve warm-up.
Details on setting the correct mains voltage, fuse replacement, and the IEC power connector.
Information on connecting speaker cabinets using 8 Ohm and 16 Ohm outputs, and the output transformer's windings.
Diagram illustrating how to wire two 8 Ohm cabinets for a combined 16 Ohm impedance.
Explanation of the Bass Focus switch for tone shaping and the effects loop for external units.
Details on using SEND/RETURN sockets, fault diagnosis, and connecting footswitches for channel and effect control.
Switches to Class A mode for very low output power (e.g., 0.3 Watts) for quiet home playing.
Instructions for replacing output valves, including biasing adjustments and safety precautions.
Physical specifications, weight, and measured output power levels in various operating modes.
Information on the 5-year limited warranty, covering manufacturing defects and faulty components.
Provides contact email and website addresses for Victory Amplification.