Need help?Do you have a question about the Victron energy LiFePO4 Battery 12,8V/60Ah Smart and is the answer not in the manual?
General| Capacity | 60 Ah |
|---|---|
| Energy | 768 Wh |
| Nominal Voltage | 12.8V |
| Charge Voltage | 14.2V - 14.6V |
| Float Voltage | 13.5V |
| Self-Discharge | 3% per month |
| Communication | Bluetooth |
Essential safety guidelines for handling lithium batteries, including personal protective equipment.
Critical warnings regarding over-discharge and over-charge to prevent damage and ensure safety.
Explanation of the BMS role in protecting battery cells from over-charge, under-charge, and temperature issues.
How to use the VictronConnect app for monitoring, configuration, and firmware updates via Bluetooth.
Describes how the smallBMS controls loads and chargers via disconnect signals.
Explains how the VE.Bus BMS communicates with inverter/chargers and controls loads/chargers.
Details the load/charge disconnect, pre-alarm, and alternator port features of the Smart BMS CL 12/100.
Describes the alternator and load/charger port capabilities of the BMS 12/200.
Explains direct control methods for loads/chargers via remote terminals, VE.Bus, or special cables.
Safe methods for charging lithium batteries from an alternator to prevent damage.
Guide to obtaining and installing the VictronConnect app for battery interaction.
Procedure for checking and updating the battery's firmware using VictronConnect.
Recommended charger settings for initial charging of batteries, especially in series/parallel configurations.
Detailed instructions on connecting battery poles, including polarity and torque specifications.
Guidance on selecting appropriate cable sizes and fuse ratings for system connections.
Instructions for connecting the BMS cables to the battery and BMS unit.
Overview of default and adjustable battery settings via VictronConnect.
Setting the minimum cell voltage to prevent damaging discharge.
To Next Page
