Need help?Do you have a question about the Victron energy Lynx Smart BMS 500 and is the answer not in the manual?
General| Brand | Victron energy |
|---|---|
| Model | Lynx Smart BMS 500 |
| Category | Camera Accessories |
| Language | English |
Introduction to the Lynx Smart BMS, its purpose, and key features like built-in contactor and monitor.
Details the BMS's role in monitoring, controlling, and protecting Victron Lithium Batteries Smart.
Explains the dual purpose of the built-in 500A contactor as safety system and remote switch.
Explains the AUX terminal's function as an auxiliary power supply for connected devices.
Connects to VictronConnect app for setup, monitoring, and diagnostic.
Connects to a GX device for remote monitoring and control via VRM portal.
Details seamless integration with the Lynx Distributor system for a continuous busbar setup.
Covers system sizing, including current ratings, fusing, and cabling requirements.
Outlines essential safety regulations, qualified personnel, and handling precautions for installation.
General guidelines for making electrical connections to the Lynx modules.
Provides detailed system examples for various configurations with Lynx Smart BMS.
Steps for initial power-up, automatic settings determination, and manual review/change.
Procedure for updating the Lynx Smart BMS and connected lithium battery firmware.
Configuration of key BMS settings like voltage, capacity, pre-alarm, relay, DVCC, and monitor.
Provides a detailed commissioning sequence checklist for the Lynx Smart BMS.
Explains the three operating modes: ON, OFF, and Standby, and their interface statuses.
Steps to recover the BMS from OFF mode when no charge voltage is detected.
Lists common reasons why the Lynx Smart BMS might not power up and how to troubleshoot.
Covers operational issues like high currents, contactor problems, and BMS temperature.
Covers battery monitor issues like incomplete current, incorrect SoC, and synchronization problems.
Details LED indications for Bluetooth and Status, plus warning, alarm, and error codes.
Details the pin-out and functions of the Lynx Smart BMS multi connector.
To Next Page
