Need help?Do you have a question about the Victron NS and is the answer not in the manual?
General| Number of outputs | 1 |
|---|---|
| Output Voltage | 12V or 24V DC |
| Protection | Overload, short circuit, over temperature, reverse polarity |
| Operating Temperature | -20°C to +60°C |
| Storage Temperature | -40°C to +80°C |
| Humidity | 95%, non-condensing |
Essential safety and installation precautions for qualified personnel.
Overview of the EV Charging Station NS, its capabilities and integration.
Details Automatic, Manual, and Scheduled charging modes for efficient energy use.
Explains WiFi, Bluetooth, GX device, and VRM integration options.
Describes the programmable RGB light ring for visual status indication.
Essential safety and installation precautions for qualified personnel.
Step-by-step guide for mounting and connecting the EV Charging Station NS.
Explains controls and status monitoring on the main web interface page.
Explains Manual, Automatic, and Scheduled charging modes.
Settings for WiFi mode, scanning, and network connection.
Enabling, disabling, and unpairing Bluetooth devices.
Configuring EVCS through the GX device interface.
Viewing status and controlling charging via the GX device menu.
Steps to connect the EVCS to a mobile device via Bluetooth.
Monitoring charging status and controlling the EVCS via the app.
Accessing and managing various EVCS settings through VictronConnect.
Saving and loading EVCS configuration files.
Viewing product details and resetting settings to factory defaults.
Configuration options for charger position, autostart, and current limits.
Calibrating the Control Pilot signal for accurate vehicle detection.
Enabling IP whitelist and managing trusted IP addresses for Modbus TCP.
Configuring the region and time zone for accurate timekeeping.
Steps to reset the device using the web interface.
Steps to reset the device using the VictronConnect app.
Using the DEF button for partial or full factory resets.
Procedure to calibrate the CP line for improved vehicle detection and charging.
Answers to common operational issues and setup queries.
Technical drawings showing the physical dimensions of the EVCS.
Template for wall mounting installation holes.
To Next Page