2024-11-04 10:06 1/16
Victron & Pylontech UP2500, US2000, US3000, US2000C, US3000C, US5000, US5000B, UF5000, Pelio-L, UP5000,
Phantom-S, Force-L1 & L2
Victron Energy - https://www.victronenergy.com/live/
Victron & Pylontech UP2500, US2000,
US3000, US2000C, US3000C, US5000,
US5000B, UF5000, Pelio-L, UP5000,
Phantom-S, Force-L1 & L2
The combination of Victron products with Pylontech lithium batteries has been tested and certified by
the Victron and Pylontech R&D departments.
General information about the battery is found in Pylontech's documentation.
This manual is intended to be used in conjunction with the product manual supplied by Pylontech. It
provides additional and specific information regarding integration with Victron systems.
The Pylontech includes a Battery Management System (BMS) with each battery module. This
interfaces with the Victron GX device and can support multiple battery modules connected in parallel.
1. Product & system compatibility
Battery UP2500*
US2000
(Plus/C)
US3000(C)
UP5000 &
US5000(B)
Pelio-L
Force-L1 &
L2
UF5000
Nominal
voltage
24V 48V 48V 48V 51.2V 48V 51.2V
Module
capacity
2.55 kWh 2.4 kWh 3.5 kWh 4.8 kwh 5.12kWh 3.55 kWh
Coming
soon
Minimum
Venus
firmware
v3.50 v3.50 v3.50 v3.50 v3.50 v3.50 v3.50
24V: UP2500 48V: US2000, US3000, US2000C, US3000C, US5000, US5000B, UP5000, Phantom-S,
Force-L1 & L2 51.2V: Pelio-L, UF5000
* Note that UP2500 came in two versions, UP2500NA01V00101 does not have a CANBUS port, and IS
NOT supported by Victron. UP2500NB01V00101 released April 2020 has the CANBUS port and IS
To Next Page
General