To Next PageTo Next Page
Need help?Do you have a question about the Vicway V-380G and is the answer not in the manual?
Details precise travel positioning and timely force detection with reversion upon encountering obstacles.
Highlights low noise, soft start, and slow stop features to protect the motor and ensure longevity.
Explains the display of operational mode and digital menu for self-monitoring functions.
Describes rolling code technology providing billions of unique combinations for security.
Details an audible alarm that sounds if the door remains open for over 10 minutes.
Explains manual door operation via the emergency release rope during power failure.
Notes enhanced safety provided by additional accessory photocells.
States that automatic closing time can be set from 30 to 240 seconds.
Indicates a reminder beep after 2000 cycles to prompt mechanical system maintenance.
Lists the necessary tools required for the installation process.
Details the process of connecting the opener's main body to the guide rail.
Explains the mounting procedures for the opener body and rail assembly.
Provides instructions for manually operating the door in case of power failure.
Details the connections for infrared ray emitting and receiving components.
Explains the operation of the infrared ray beam during door closing and opening.
Outlines the initial preparation steps before commencing programming.
Procedure for setting the upper travel limit of the garage door.
Procedure for setting the lower travel limit of the garage door.
Process for setting the operational force required for the door.
Details on adjusting the force level for optimal door movement.
Instructions on programming the buttons of the remote transmitter.
Configuration options for the alarm functions and timings.
Setting the time delay for the automatic closing of the door.
Configuration of an alarm that triggers after 2000 operational cycles.
Steps to complete and save the programmed settings.
Procedure for encoding transmitters to operate the opener.
Instructions for removing programmed transmitters from the opener's memory.
Details opener models and their suitable applications and environmental conditions.
Lists available guide rail models with their lengths and door rising heights.
Provides a comprehensive list of technical specifications for the opener.
Instructions on routine maintenance and care for the opener.
Describes standard operating procedures for remote and manual control.
Guides on diagnosing and resolving common faults and issues.
Instruction to open the rail assembly packaging.
Guidance on unfolding the rail sections as indicated by an arrow.
Instruction to position the connector between the limiting positions on the rail.
Step for securing the rail assembly by tightening a specific nut.
Guidance on making adjustments based on the provided diagram.
Indicates the completion of the rail assembly.
Diagram illustrating the wiring connections for the V-380G model.
Diagram illustrating the wiring connections for the V-390G model.
General| Brand | Vicway |
|---|---|
| Model | V-380G |
| Category | Garage Door Opener |
| Language | English |
