Select language as below.
5-1. BATTERY CAPACITY TEST
This test determines condition of battery according to rated value
labeled on the battery.
5-1-1. First make sure the engine and all devices are off . The
voltage value will be higher than that in the normal situation due to
the checked battery is fully charged after the vehicle runs for a
while. Please turn on the headlights for 2 to 3 minutes, until
battery voltage drops to the normal value, then turn off all devices
and start testing.
5-1-2. Press <▲> <▼> to select “1. BATTERY CAPACITY”
and press <ENTER> to continue.
4
To Next Page
Loading...