EasyManua.ls Logo

Videology 24RS2.0XW-EXSDI User Manual

Videology 24RS2.0XW-EXSDI
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Doc # INS-24RS2.0SW-EXSDI
Issue Date: 11/27/2017
Revision: A
Page 1 of 19
Prior to Using This Document: Videology reserves the right to modify the information in this
document as necessary and without notice. It is the user’s responsibility to be certain they possess the
most recent version of this document by going to www.videologyinc.com, searching for the model
number, and comparing revision letters on the respective document, located in the document’s footer.
For technical assistance with this product, please contact the supplier from whom the product was
purchased.
Videology
®
Imaging Solutions, Inc.
Videology
®
Imaging Solutions, Europe B.V.
37M Lark Industrial Parkway
Greenville, Rhode Island 02828 USA
Tel: (401) 949 5332 Fax: (401) 949 5276
Americas, Middle East, Far East & Australia sales:
sales@videologyinc.com
Neutronenlaan 4
5405 NH Uden, The Netherlands
Tel: +31 (0) 413 256261 Fax: +31 (0) 413
251712
Europe & N. Eurasia sales:
info@videology.nl
Instruction Manual
24RS2.0XW-EXSDI
IMAGING SOLUTIONS INC.
Original Equipment Manufacturer
Question and Answer IconNeed help?

Do you have a question about the Videology 24RS2.0XW-EXSDI and is the answer not in the manual?

Videology 24RS2.0XW-EXSDI Specifications

General IconGeneral
Resolution1920 x 1080
Sensor Size1/2.8"
Video OutputHD-SDI
Sensor TypeCMOS
Day/NightYes
Minimum Illumination0.05 Lux
Power SupplyDC 12V

Summary

Introduction and Usage Guidelines

License Agreement and Warranty

Safety Precautions

Document History and Overview

Physical Dimensions

OSD Menu Configuration Table

OSD Menu Operations

Lens and Focus Settings

Configure lens settings for DC auto iris or manual lens operation.

Exposure Control

Adjust camera exposure parameters including brightness and shutter speed.

Shutter, AGC, and Backlight Controls

Shutter Speed Control

Configure shutter speed settings for auto, manual, flickerless, and sens-up modes.

AGC (Auto Gain Control)

Adjust Auto Gain Control to amplify video signal in low light conditions.

Backlight Compensation

Manage backlight conditions to improve image clarity and reduce silhouette effects.

WDR, Defog, and Day/Night Modes

HLC (High Light Compensation)

Suppress strong light sources like headlights to reveal more detail in dark areas.

BLC (Backlight Compensation)

Brighten foregrounds with strong backlighting, compensating for silhouette effects.

WDR (Wide Dynamic Range)

Correct excessive light and dark areas for a usable image with better dynamic range.

Color, B/W, and Noise Reduction Settings

Day & Night Mode Settings

Control camera settings for optimal performance during day and night operations.

Color Mode and White Balance

Configure color video output, auto white balance, and color gain settings.

Image Enhancement and Privacy Mask

Black & White Mode

Set the camera to operate exclusively in Black & White video mode.

3D-NR (Digital Noise Reduction)

Reduce signal noise in low light conditions to improve picture quality.

Image Enhancement Settings

Configure image parameters such as sharpness, gamma, mirror, and flip for optimal display.

Motion Detection and System Settings

ACE (D-WDR) and Defog

Enhance image brightness and clarity in challenging environments like fog or rain.

Privacy Mask Configuration

Configure privacy zones to mask specific areas of the video feed for compliance.

Advanced System and Exit Options

Privacy Mask Transparency

Set transparency levels for privacy mask areas, from fully opaque to fully transparent.

Motion Detection Setup

Configure motion detection areas, sensitivity, and display options.

System Configuration and Operation

Motion Detection Sensitivity & Display

Adjust motion detection sensitivity and configure OSD display of motion results.

System Output and Video Settings

Select video output formats, resolution, and TV system standards.

System Resolution, Language, and Exit

System Resolution, Language & Title

Configure video resolution, OSD language, and custom camera titles.

Exit and Save Setup

Exit the setup menu, saving or discarding any changes made.

Technical Specifications

Electrical and Environmental Specs

Details electrical characteristics, operating environment, and power consumption.

OSD Controls and Cabling

Information on OSD control board connectivity and camera cabling options.

Contact and Support Information

Americas Region Contact

Contact details for Videology Imaging Solutions in the Americas, Middle East, Far East & Australia.

Europe Region Contact

Contact details for Videology Imaging Solutions Europe B.V. in Europe & N. Eurasia.